image MAYOR V4 Aluminum

MAYOR V3 Titanium

MAYOR V3 Titanium

Our incumbent Mayor has been significantly redesigned for its next campaign. The best value in the category just got better. Rear stays have been massively beefed-up using a new Titanium Custom Yoke design with an engraved RSD logo to increase lateral rigidity and handle the loads that you’ll be applying in a full term of fat fun.

But with the same proven build as the V2, bolstered by RaceFace Cinch cranks and direct-mount 28T ring, and DT Swiss 80mm BR2250 wheels, all rolling on massive Maxxis Minion 4.8” tires, we don’t think there’s anything you’ll need to change on the V3 to make one successful run after another.

Changes include:
Slacker head angle – 67 degrees
Steeper seat tube angle – 74 degrees
Sliding drop-outs and chainstay lengths of 450mm-465mm (sizes S to XL) allowing up to 100mm rims and 5.05” tires
Greater reach (on all sizes), and shorter and unique head tube lengths for each size, too
Internal dropper-post cable routing

Buy Now

  • Build Kit 1
  • Build Kit 2
  • Specs & Geometry

1×11 Carbon Fork

  • Frame:  FAT Bike Titanium V3 3AL 2.5V
  • Fork: RSD Custom 490mm Carbon w/15x150mm Axle
  • Headset: Cane Creek ZS-44
  • Handle Bar: Race Face 35mm Next SL 760mm Blue
  • Stem: Race Face Turbine 35mm 70mm
  • Grips: Ergon GE10
  • Front Wheel: 26x80mm DT Swiss BR2250 with DT350 15x150mm Hub
  • Rear Wheel: 26x80mm DT Swiss BR2250 with DT350 12x197mm Hub
  • Crank: Race Face 175mm Next SL DM
  • Chain Ring: Race Face 28T NW Ring
  • BB: Race Face 100mm BSA
  • Chain: KMC 11-1SL
  • Cassette: Shimano XT 11/46T 11spd
  • Rear Shifter: Shimano XT 11spd Black
  • Rear Derailleur: Shimano XT 11spd Black
  • Brakes: Shimano XT M8000
  • Rotors: Shimano SLX 180mm
  • Saddle: WTB Volt Comp 42mm
  • Seat Post: Race Face Turbine 30.9mm
  • Rear Axle: SRAM Maxle Ultimate 12x197mm
  • Tires: Maxxis Minion FBF & FBR 4.8

Frame Weight (M): 5 Lbs 1 oz
Complete Build 1 Weight (M): 30 Lbs 3 oz with Tubes
Complete Build 2 Weight (M): 33 Lbs 14 oz with Tubes

Sizes: Sm, Med, Lrg & Xlrg

Finish: Brushed

Pricing:
Complete: 
$4999.00 CAD / $4299.00 USD
Frame / Carbon Fork Combo: $2599.00 CAD / $2299.00 USD
Frame Only: $2299.00 CAD / $1999.00 USD
Carbon Fork: $399.00 CAD / $349.00 USD

Included with the Frame Only option

  • Cane Creek ZS-44 Headset for tapered steer tube
  • Rear 12x197mm Sliding Drop-out Inserts
  • Sliding Drop-out Rack Mount Adapters
  • SRAM Rear Maxle Ultimate 12x197mm
  • Seat Post Clamp

All prices listed are Minimum Suggested Retail

1×11 Mastodon Fork

  • Frame:  FAT Bike Titanium V3 3AL 2.5V
  • Fork: Manitou Mastodon EXT Comp 100mm
  • Headset: Cane Creek ZS-44
  • Handle Bar: Race Face 35mm Next SL 760mm Blue
  • Stem: Race Face Turbine 35mm 70mm
  • Grips: Ergon GE10
  • Front Wheel: 26x80mm DT Swiss BR2250 with DT350 15x150mm Hub
  • Rear Wheel: 26x80mm DT Swiss BR2250 with DT350 12x197mm Hub
  • Crank: Race Face 175mm Next SL DM
  • Chain Ring: Race Face 28T NW Ring
  • BB: Race Face 100mm BSA
  • Chain: KMC 11-1SL
  • Cassette: Shimano XT 11/46T 11spd
  • Rear Shifter: Shimano XT 11spd Black
  • Rear Derailleur: Shimano XT 11spd Black
  • Brakes: Shimano XT M8000
  • Rotors: Shimano SLX 180mm
  • Saddle: WTB Volt Comp 42mm
  • Seat Post: Race Face Turbine 30.9mm
  • Rear Axle: SRAM Maxle Ultimate 12x197mm
  • Tires: Maxxis Minion FBF & FBR 4.8

Frame Weight (M): 5 Lbs 1 oz
Complete Build 1 Weight (M): 30 Lbs 3 oz with Tubes
Complete Build 2 Weight (M): 33 Lbs 14 oz with Tubes

Sizes: Sm, Med, Lrg & Xlrg

Finish: Brushed

Pricing:
Complete: $5299.00 CAD / $4499.00 USD
Frame / Mastodon  Fork Combo: $2899.00 CAD / $2499.00 USD
Frame Only: $2299.00 CAD / $1999.00 USD
Carbon Fork: $399.00 CAD / $349.00 USD

Included with the Frame Only option:

  • Cane Creek ZS-44 Headset for tapered steer tube
  • Rear 12x197mm Sliding Drop-out Inserts
  • Sliding Drop-out Rack Mount Adapters
  • SRAM Rear Maxle Ultimate 12x197mm
  • Seat Post Clamp

All prices listed are Minimum Suggested Retail

 

Frame Specs

  • Handmade Frame:  Titanium 3AL 2.5V
  • CNC Machined Custom Yoke: Titanium 3AL 2.5V
  • CNC Machined Sliding Drop-Out: Titanium 6AL 4V
  • CNC Machined Head Tube: 44mm
  • CNC Machined Bottom Bracket Shell: 100mm BSA
  • CNC Machined Sliding Inserts: 7000 Series Aluminum – 12mm Maxle and IS Disc Mount
  • Dropper Post Routing: Internal
  • Hardware: Stainless Steel
  • Fork Length: 531mm (100mm)
  • Rear Spacing: 197mm
  • Seat Post Clamp: 34.9mm
  • Seat Post: 30.9mm
  • Max Tire Size: 26×5.05in, 27.5×4.5in, 29x3in
  • Max Fork Length: 551mm Axle to Crown (120mm Travel)
Diagram
Geometry — Metric
Geometry — Imperial

Buy Now